Copper Spur UL3 Footprint

Protective ground cover for Copper Spur UL3 tent.

To extend the life of your tent floor, we recommend using a Big Agnes footprint or ground cloth. The Big Agnes footprint also enables you to pitch a lightweight, Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles, and stakes.

Features
• Compatible with Copper Spur UL3 tents featuring Tiplok™ Tent Buckles
• Also compatible with Copper Spur UL3 Bikepack and Copper Spur UL3 mtnGLO® Tents
• Fast Fly setup available-stake out your footprint, insert your tent poles into corners, drape your fly over the top, and buckle it in for an even lighter, smaller packing setup
• Fully compatible with Copper Spur UL3 models made after 2020-may be compatible with older models, without Fast Fly capability

Materials
• Proprietary HyperBead™ fabric technology, 30D Nylon Ripstop with 1,500mm waterproof Silicone and Polyurethane coating without intentionally added PFAS
• All seams taped with waterproof, solvent-free Polyurethane tape(No PVC or VOC's)

Specifications
• Packed Size: 8"x5"x2"/20x13x5cm
• Weight: 7oz/207g

Care
• Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear
• Apply waterproof gear specific wash and gently work into fabric with sponge
• Rinse gear thoroughly
• Hang it up to dry
• Triple check that your gear is completely dry before storage or use
• Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing
• Never use hot water, bleach, liquid detergents, or dishwashing liquids
• Allow to dry completely before storage or use
• Avoid prolonged direct sunlight as UV exposure can compromise waterproofing